FAQ's


Sign In / Create New Account	PARTS \| MANUALS \| STORE LOCATOR \| WARRANTY REGISTRATION \| FAQs

Pop-Up Portables

Sled-Style Shelters

Shelter Accessories

Power Ice Augers

Auger Accessories

Older Products & Parts

FAQs

Enter a keyword to search our Frequently Asked Questions. If you are unable to find what you are looking for, click the Contact Us link in the header to request information.


	Search results will match all keywords given (Enter keywords separated by a space. Example: power cable)


	Most Popular FAQ's ranked by views

Where can I look for a manual for an Eskimo product?

Can my Eskimo Ice Auger be converted to a post hole digger?

What is the gas/oil ratio for my Viper engine?

My Viper engine starts and then dies in a few minutes?

What is the carburetor setting on my Viper engine?

What type of oil do I use in my Viper engine?

What is causing my Viper engine spark plug to foul out?

How can I tell if my cap is venting properly on my Viper engine?

I have a tear in my skin, how do I repair it?

What is the difference between the Turbo and Quantum blades?

Can I adjust my Viper engine throttle cable?

Where can I get my ice auger blades sharpened?

Can you use the Quickfish 6 in the summer time for camping?

I can see small pin holes in my shelter skin, why?

My zipper functions roughly or freezes up from snow/ice. How can I fix this?

I ordered my part Thursday morning, two day air and its now Monday, why haven't I received my part?

How can I keep mice and other rodents from damaging my ice shelter?

How does one heat the quickfish 6?

Where can I find all info on the Eskimo ice auger model 8900?

How can I find a part for my ice shelter?

How do I order replacement parts for a product I own?

Why can't I purchase some products online?

My poles are noisy and don�t run as smooth as they did originally. Is there a fix?

Can I wash my ice shelter skin?

I replaced my blades on my quantum m43 and it still wont cut it only jumps and skips on ice why

What is the shelter material made of?

My shelter lets some water come through it, how can I remedy that?

What is a Viper engine?

Where can I purchase blades for my older augers?

I can see cracks on the inside of my shelter skin, why?

Can I buy ice anchors, high speed tracking kits, tow hitches or travel covers direct from Eskimo?

Do you have any tips to set up the shelters in wind?

How many people can fit in each Eskimo ice shelter?

Why are my windows turning cloudy when they get wet?

Do I have to have a tracking kit to tow my ice shelter?

Will my ice shelter leak from the small pin holes in skin?

Is the Eskape seat system able to be retrofitted to the Quickflip shelters or any other older shelters?

The edge trim is hard to put on the sled lip, is there a secret?

How much does a Mako M43Q8 weigh?

What is the RPM for the auger flighting on each model?

For attaching the edge trim to my skin and sled, do I actually drill holes through the skin?

How many runner strips come in a tracking kit?

Where can I get replacement parts like the white clips at the end of the poles?

What are the engine RPM's of the augers?

How do I order replacement windows for my shelter?

Where can I purchase replacement blades for my old Ardis Quick Digger?

how old is the Eskimo auger with the serial 18991 model 8900

Can I use the Viper oil in my Barracuda which says 241

My Eskimo 8900 ice auger will not cut When putting pressure on it the auger stops Is the clutch drum bad or the centrifugal clutch roter

where can i purchase parts for a model 9403S shark auger

What type of fuel can I use in my product's engine?

I have an green eskimo3 I need the plastic ends for the poles that go in front where can I get them

do you have replacement blades for power ice augers

How do I adjust the idle speed on an Eskimo M43Q10

Where can I find a owners manual or part listing for the Pro300 ice shelter

where can i take my ice auger if I need it fixed or maintained

i have an older eskmio ice auger model 8900 when i first start it i have to prime the carbto get it started after that it will start every time how can i fix this problem

My Shark Z-71 appears to have flooded badlyThe spark plug is all wet and gas pours out of the mufflerWhat could have caused this and how to remedy?.

Dose Eskimo have a blade exchange program Send them the old ones they send you new ones at a discounted price or something

My New Viper Z71 starts good first pull idles good but it does not rev up with out a partial choke even following a warm up period I have only started it in the garage 3 times as part of a break in period It also seems to vibrate far more then my old Mag 2000 ever did Should I be concerned about these conditions I would contact my retailer however they are 500 miles away from here Thanks Colin

how can i find out information about my eskimo ice auger

Looking for prices on pop-up shelters

Is vibration in Z51 normal when drilling at full throttle

What eskimo model is best suited for spearing

gas is leaking thru carberator in to cylinders fouling sparkplugs

My Shark Z51 Will drill a few holes and then die and wont start back up for a while What is the cause

how do i do retunrs

how do i get parts for model 8903B

What would make the fuel in the primer and primer hose leak into the air in-take

where can I find a clutch for model 8600 Ice drill

can the express 2 person shanty able to converted to regular seats like oth flip shantys

can i buy an ice auger engine

We have an Eskimo Shark Z51 Ice Auger We ordered a fuel tank 300331 and it is not the same configeration as the old one It will not fit and does not line up When looking at the parts list we do not see the one we need Is there another fuel tank available I assume it may be an older model? Thank you for your assistance

where can i find info on my eskimo 2000 7 ice auger

we are having trouble locating a travel cover for your eskimo quickflip2Can you tell us how to find it on the website or how to locate one in another loacation Thank you for your time

price of tent shelters

What would make the fuel in the primer and primer hose leak into the air in-take Stingray model with the Viper engine

i have a eskimo model no8200 and serial no58202 how do i get a bigger blade

what is the gas to oil ratio for the stingrays

Im looking for replacement parts for an old Ardisam ice auger Model 8300 with a SN of 10000 It also has a faceplate with stamped number of 11677 on it